design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors 1 2 3 4 5 6 7 8 9 10 11 e c w u 1 5 jx product code dielectric & construction cap. tol. suf?x rated voltage capacitance suf?x code 5 tape width 8 mm j 5 % 1 100 v.dc element (stacked) outer electrode l0.2 w0.2 h0.2 e0.30 e0.30 g specifi cations small in size (minimum size 3.2 mm 1.6 mm) 85 c, 85 %rh, w.v. 1.0 for 500 hours for re? ow soldering rohs directive compliant general purpose (coupling, by-pass) stacked metallized pen ? lm as dielectric with simple mold-less construction features stacked metallized pen film chip capacitor type : ecwu(x) category temp. range (including temperature-rise on unit surface) C 55 c to +105 c rated voltage 100 v.dc capacitance range 0.0010 f to 0.010 f (e12) capacitance tolerance 5 %(j) dissipation factor (tan d ) tan d < 1.0 % ( 20 c, 1 khz ) withstand voltage between terminals : rated volt. (v.dc) 150 %, 60 s insulation resistance (ir) ir > 3000 m (20 c, 100 v.dc, 60 s) soldering conditions re? ow soldering : 250 c max. and 60 s max. at more than 220 c (temp. at capacitor surface) ? in case of applying voltage in alternating current (50 hz or 60 hz sine wave) to a capacitor with dc rated voltage, please refer to the page of permissible voltage (r.m.s) in alternating current corresponding to dc rated voltage. size code lwhe g h2 3.2 1.6 1.1 0.65 > 1.0 h3 3.2 1.6 1.5 0.65 > 1.0 g2 3.2 2.5 1.5 0.65 > 1.0 g3 3.2 2.5 2.1 0.65 > 1.0 unit : mm explanation of part number construction dimensions recommended applications feb. 2016 01
design and specifications are each subject to change without notice. ask factory for the current technical specifications befo re purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. plastic film capacitors capacitance (f) rated voltage 100 v.dc part no. dimensions (mm) size code q'ty lwh 0.0010 ecwu1102jx5 3.2 1.6 1.1 h2 3000 0.0012 ecwu1122jx5 3.2 1.6 1.1 h2 0.0015 ecwu1152jx5 3.2 1.6 1.1 h2 0.0018 ecwu1182jx5 3.2 1.6 1.1 h2 0.0022 ecwu1222jx5 3.2 1.6 1.1 h2 0.0027 ecwu1272jx5 3.2 1.6 1.1 h2 0.0033 ECWU1332JX5 3.2 1.6 1.5 h3 2000 0.0039 ecwu1392jx5 3.2 1.6 1.5 h3 0.0047 ecwu1472jx5 3.2 1.6 1.5 h3 0.0056 ecwu1562jx5 3.2 2.5 1.5 g2 0.0068 ecwu1682jx5 3.2 2.5 1.5 g2 0.0082 ecwu1822jx5 3.2 2.5 2.1 g3 0.010 ecwu1103jx5 3.2 2.5 2.1 g3 cap. > 0.012 f : please use 100 v.dc rating of ecwu(c) land electrode c a b size code land dimensions re? ow soldering abc h2, h3 1.8 3.6 1.4 g2, g3 1.8 3.6 2.3 ? lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when recommender for l and dimensions is adopted. unit : mm refer to the page of taping speci? cations capacitance tolerance : 5 %(j) taping specifi cation for automatic mounting rating dimensions quantity recommended for land dimensions feb. 2016 01
|
